# Makefile.in generated by automake 1.10.1 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/opensc pkglibdir = $(libdir)/opensc pkgincludedir = $(includedir)/opensc am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-linux-gnu host_triplet = x86_64-unknown-linux-gnu am__append_1 = html.out/* #am__append_2 = man.out/*.1 man.out/*.3 man.out/*.5 subdir = doc DIST_COMMON = README $(am__dist_html_DATA_DIST) \ $(am__dist_noinst_DATA_DIST) $(dist_doc_DATA) \ $(dist_man1_MANS) $(dist_man3_MANS) $(dist_man5_MANS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \ $(top_srcdir)/m4/libassuan.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" \ "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(docdir)" \ "$(DESTDIR)$(htmldir)" man3dir = $(mandir)/man3 man5dir = $(mandir)/man5 NROFF = nroff MANS = $(dist_man1_MANS) $(dist_man3_MANS) $(dist_man5_MANS) am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; dist_docDATA_INSTALL = $(INSTALL_DATA) am__dist_html_DATA_DIST = html.out/* dist_htmlDATA_INSTALL = $(INSTALL_DATA) am__dist_noinst_DATA_DIST = $(srcdir)/tools/*.xml $(srcdir)/api/*.xml \ $(srcdir)/api/apps/*.xml $(srcdir)/api/asn1/*.xml \ $(srcdir)/api/card/*.xml $(srcdir)/api/file/*.xml \ $(srcdir)/api/init/*.xml $(srcdir)/api/misc/*.xml \ $(srcdir)/api/types/*.xml $(srcdir)/api/util/*.xml \ $(srcdir)/api/api.css $(srcdir)/api/*.xsl html.out/* \ man.out/*.1 man.out/*.3 man.out/*.5 DATA = $(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/aj/snapshot/svn/opensc/missing --run aclocal-1.10 AMTAR = ${SHELL} /home/aj/snapshot/svn/opensc/missing --run tar AR = ar AS = as AUTOCONF = ${SHELL} /home/aj/snapshot/svn/opensc/missing --run autoconf AUTOHEADER = ${SHELL} /home/aj/snapshot/svn/opensc/missing --run autoheader AUTOMAKE = ${SHELL} /home/aj/snapshot/svn/opensc/missing --run automake-1.10 AWK = mawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -fno-strict-aliasing -g -O2 -pedantic -Wall -Wextra CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = CXXDEPMODE = depmode=none CXXFLAGS = CYGPATH_W = echo DEFAULT_PCSC_PROVIDER = /usr/lib/libpcsclite.so DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = dlltool DSYMUTIL = ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = F77 = FFLAGS = GREP = /bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = LIBASSUAN_CFLAGS = LIBASSUAN_CONFIG = no LIBASSUAN_LIBS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = LTLIB_CFLAGS = LTLIB_LIBS = -lltdl MAKEINFO = ${SHELL} /home/aj/snapshot/svn/opensc/missing --run makeinfo MKDIR_P = /bin/mkdir -p NMEDIT = OBJDUMP = objdump OBJEXT = o OPENCT_CFLAGS = -I/home/aj/snapshot/include OPENCT_LIBS = -L/home/aj/snapshot/lib -lopenct OPENSC_LT_AGE = 0 OPENSC_LT_CURRENT = 2 OPENSC_LT_OLDEST = 2 OPENSC_LT_REVISION = 0 OPENSC_VERSION_FIX = 6 OPENSC_VERSION_MAJOR = 0 OPENSC_VERSION_MINOR = 11 OPENSSL_CFLAGS = OPENSSL_LIBS = -lcrypto OPTIONAL_OPENCT_CFLAGS = -I/home/aj/snapshot/include OPTIONAL_OPENCT_LIBS = -L/home/aj/snapshot/lib -lopenct OPTIONAL_OPENSSL_CFLAGS = OPTIONAL_OPENSSL_LIBS = -lcrypto OPTIONAL_PCSC_CFLAGS = -I/usr/include/PCSC OPTIONAL_READLINE_CFLAGS = OPTIONAL_READLINE_LIBS = -lreadline OPTIONAL_ZLIB_CFLAGS = OPTIONAL_ZLIB_LIBS = -lz PACKAGE = opensc PACKAGE_BUGREPORT = PACKAGE_NAME = opensc PACKAGE_STRING = opensc 0.11.6-svn-r3609 PACKAGE_TARNAME = opensc PACKAGE_VERSION = 0.11.6-svn-r3609 PATH_SEPARATOR = : PCSC_CFLAGS = -I/usr/include/PCSC PKG_CONFIG = /usr/bin/pkg-config PTHREAD_CC = gcc PTHREAD_CFLAGS = -pthread PTHREAD_LIBS = RANLIB = ranlib RC = no READLINE_CFLAGS = READLINE_LIBS = -lreadline SED = /bin/sed SET_MAKE = SHELL = /bin/sh STRIP = strip SVN = svn TR = tr VERSION = 0.11.6-svn-r3609 WGET = wget WGET_OPTS = -nv WIN_LIBPREFIX = XSLTPROC = xsltproc ZLIB_CFLAGS = ZLIB_LIBS = -lz abs_builddir = /home/aj/snapshot/svn/opensc/doc abs_srcdir = /home/aj/snapshot/svn/opensc/doc abs_top_builddir = /home/aj/snapshot/svn/opensc abs_top_srcdir = /home/aj/snapshot/svn/opensc ac_ct_CC = gcc ac_ct_CXX = ac_ct_F77 = acx_pthread_config = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86_64-unknown-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = unknown builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-unknown-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) /home/aj/snapshot/svn/opensc/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include openscincludedir = $(includedir)/opensc pdfdir = ${docdir} pkcs11dir = $(libdir)/pkcs11 pkgconfigdir = $(libdir)/pkgconfig plugindir = $(libdir)/mozilla/plugins prefix = /home/aj/snapshot program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = /home/aj/snapshot/etc target_alias = top_builddir = .. top_srcdir = .. xslstylesheetsdir = /usr/share/xml/docbook/stylesheet/nwalsh MAINTAINERCLEANFILES = $(srcdir)/Makefile.in wikidir = $(htmldir)/wiki #SUBDIRS = nonpersistent DIST_SUBDIRS = nonpersistent dist_noinst_DATA = $(srcdir)/tools/*.xml $(srcdir)/api/*.xml \ $(srcdir)/api/apps/*.xml $(srcdir)/api/asn1/*.xml \ $(srcdir)/api/card/*.xml $(srcdir)/api/file/*.xml \ $(srcdir)/api/init/*.xml $(srcdir)/api/misc/*.xml \ $(srcdir)/api/types/*.xml $(srcdir)/api/util/*.xml \ $(srcdir)/api/api.css $(srcdir)/api/*.xsl $(am__append_1) \ $(am__append_2) #dist_html_DATA = html.out/* dist_doc_DATA = README dist_man1_MANS = man.out/*.1 dist_man3_MANS = man.out/*.3 dist_man5_MANS = man.out/*.5 all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done install-man3: $(man3_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)" @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.3*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 3*) ;; \ *) ext='3' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \ done uninstall-man3: @$(NORMAL_UNINSTALL) @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.3*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 3*) ;; \ *) ext='3' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man3dir)/$$inst"; \ done install-man5: $(man5_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)" @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 5*) ;; \ *) ext='5' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \ done uninstall-man5: @$(NORMAL_UNINSTALL) @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.5*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 5*) ;; \ *) ext='5' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man5dir)/$$inst"; \ done install-dist_docDATA: $(dist_doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" @list='$(dist_doc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(dist_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ $(dist_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ done uninstall-dist_docDATA: @$(NORMAL_UNINSTALL) @list='$(dist_doc_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ rm -f "$(DESTDIR)$(docdir)/$$f"; \ done install-dist_htmlDATA: $(dist_html_DATA) @$(NORMAL_INSTALL) test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" @list='$(dist_html_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(dist_htmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ $(dist_htmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-dist_htmlDATA: @$(NORMAL_UNINSTALL) @list='$(dist_html_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(htmldir)/$$f'"; \ rm -f "$(DESTDIR)$(htmldir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(MANS) $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-local \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-dist_docDATA install-dist_htmlDATA \ install-man install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-man1 install-man3 install-man5 install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-dist_docDATA uninstall-dist_htmlDATA \ uninstall-man uninstall-man: uninstall-man1 uninstall-man3 uninstall-man5 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-local distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dist_docDATA \ install-dist_htmlDATA install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-man1 install-man3 \ install-man5 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-dist_docDATA uninstall-dist_htmlDATA uninstall-man \ uninstall-man1 uninstall-man3 uninstall-man5 html.out/*: html.out html.out: api.work test -n "$(XSLTPROC)" -rm -fr html.tmp html.out $(MKDIR_P) html.tmp $(XSLTPROC) --nonet --path "$(srcdir)/api" --xinclude -o "html.tmp/api.html" "api.work/html.xsl" "$(srcdir)/api/api.xml" $(XSLTPROC) --nonet --path "$(srcdir)/api" --xinclude -o "html.tmp/tools.html" "api.work/html.xsl" "$(srcdir)/tools/tools.xml" mv html.tmp html.out man.out/*.1: man.out man.out: api.work test -n "$(XSLTPROC)" -rm -fr man.tmp man.out $(MKDIR_P) man.tmp $(XSLTPROC) --nonet --path "$(srcdir)/api" --xinclude -o "man.tmp/" "api.work/man.xsl" "$(srcdir)/api/api.xml" $(XSLTPROC) --nonet --path "$(srcdir)/api" --xinclude -o "man.tmp/" "api.work/man.xsl" "$(srcdir)/tools/tools.xml" mv man.tmp man.out man.out/*.3 man.out/*.5: man.out/*.1 # # This part is needed as found no # way to make xsltproc find xsl-stylesheets # in builddir while xsl on srcdir # api.work: \ $(abs_srcdir)/api/html.xsl \ $(abs_srcdir)/api/man.xsl -rm -fr api.work $(MKDIR_P) api.work $(LN_S) "$(abs_srcdir)/api/html.xsl" api.work/html.xsl $(LN_S) "$(abs_srcdir)/api/man.xsl" api.work/man.xsl $(LN_S) "$(xslstylesheetsdir)" api.work/xsl-stylesheets #html.out/*: #man.out/*.1: #man.out/*.3 man.out/*.5: man.out/*.1 #html.out/*: $(abs_builddir)/html.out #$(abs_builddir)/html.out: # $(LN_S) "$(srcdir)/html.out" html.out #man.out/*.3 man.out/*.5 man.out/*.1: $(abs_builddir)/man.out #$(abs_builddir)/man.out: # $(LN_S) "$(srcdir)/man.out" man.out maintainer-clean-local: -rm -rf "$(srcdir)/html.out" "$(srcdir)/man.out" distclean-local: -rm -fr html.tmp man.tmp api.work if test -L html.out; then \ rm -rf html.out; \ fi if test -L man.out; then \ rm -rf man.out; \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: